The sampling swab uses advanced jet implanted nylon fuzz
technology. Compared with conventional fiber swabs, the sample is
easily penetrated, diluted, and trapped in the fiber. The nylon
flocking swab has outstanding sample collection and release
capability,And the release rate can reach 90%, which is much higher
than that of the conventional fiber swab.
Dimension Overall length(150mm)Diameter(3mm)
Break off point:80mm
Tip Material:flocked fabric
1. This product is for single use only. It must be strictly
implemented according to the instruction for use.
2. It should be destroyed immediately after use.
3. It is forbidden to reuse.
4. The disposal of its wastes should be carried out according to
the relevant laws and regulations of the state on environmental
5. Products should be stored in dry, ventilated, radiant, clean
6. The batch number of the product is at the seal of the packing,
and it is valid for 2 years.
7. Please read the instruction manual carefully and pay attention
to the date of production and batch number before use.
1. This product is a disposable product, so it is forbidden to
reuse. After use, it should be treated as medical waste;
2. Before use, please pay attention to whether the packaging and
products are damaged or have other obvious defects. Please check
whether the product is within the validity period. If it is beyond
the validity period, please do not use it.
3. Please read the relevant instructions carefully before use, and
be familiar with the instructions and operation methods of the
Storage Condition: Store at ambient temperature and store in dry
and ventilated places. Be careful of damp. Do not store with
poisonous or special smell. Avoid direct contact with fire sources
and inflammable and corrosive substances.